MASK CRESSI ZEUS

ZEUS provides a series of technical advantages that Cressi has been incorporating in different models in the last seasons. It combines a great technology with a captivating design and standard proportions, both on the frame and on the skirt.
Its exclusive structure integrates the frame in the skirt instead of overlapping them.This exclusive construction system, that allows the assembly without any glue, reduces the thickness to an absolute minimum, thus improving the internal volume, visibility and adaptation of the mask to the face. In addition, it reduces its weight to 125 g in total and gives the mask the structural rigidity of a traditional mask, but with the advantages of a frameless mask. It also improves the mask’s watertightness, eliminates any possibility of annoying contact between the frame and the forehead and eliminates vision from inside of the central area of the frame.

CRESSI FOG STOP SYSTEM New Patent Pending

FOG STOP system. A thin silicone membrane around the nose acts as a deflector, so that the warm air coming from the nose, when compensating for external pressure, is not concentrated directly onto the lenses, thus reducing the tendency to fog that is commonly found in small volume masks. This membrane also has the function of stabilizing the mask on the face, which remains firmly secured, regardless of the possible movements of the face or the effect of pressure variations.

Its structure optimizes empty spaces and reduces the internal volume to only 95 cm³. The distance between lens and face has been reduced to such an extent that the facial does not reach the known suction effect, but simply rests on the face, ensuring an excellent seal, thanks to its design and the studied ratio of thickness / rigidity of the silicone.

The inclined Big Eyes lens system is prolonged by soft curved lines over the cheekbones, improving lower and lateral visibility, which are virtually limitless. The special structure and adaptation studied in the delicate area of the frontal bone optimize the superior visibility, without damaging the adaptation ability.

The buckles, anchored to the frame for optimal stability of the mask and for a tension always determined by the user, are fully folding and tilting in all directions. Therefore, the possibility of breakage is almost zero. This type of anchorage also improves the stability of the mask, as the tension of the strap is produced on a rigid element and the movements of the snorkel or face do not affect the skirt.

Colors in black silicone version: black-black, black-gold, black-silver, black-black iridium, black-red, gray-black, black-white, metallic blue.

Cressi ZEUS Mask Features:

• Buckles anchored in the frame, for an optimal stability of the mask and the adjustment is always determined by the user. They are completely articulated and tiltable in every way, so the possibility of breakage is almost impossible.
  
• Sliding buckle that fixes the ends of the strip.

• The construction system allows the assembly without the need of paste, and reduces to the absolutely minimum the thickness improving also the internal volume, the visibility and the adaptation of the mask. 

• CRESSI FOG STOP SYSTEM New Patent Pending. A patented membrane surrounding the inner nose pocket which acts as a barrier and traps any moisture escaping from the diver’s nose involuntarily when breathing through the mouth.
  Not only is moisture channeled away from the lenses, thus avoiding fogging, but it also reduces the need to compensate for pressure.
  Cressi suggests the using anti-fog solution or saliva on the inside of the lenses and rinsing with water to further improve the
  anti-fog effect.

SNORKEL ITACA Cressi

The Itaca Ultra Dry snorkel features at the top end an internationally patented dry guard, which prevents water entry while using it on the surface in any position. The new mechanical device has three movement joints, whose counterweight ensures immediate opening of the upper valve whether you dive or emerge from the water. The lower part is equipped on the inner side with a smooth flexible corrugated section, which keeps the aerator away from the mouth while using any breathing apparatus.
The mouthpiece, made of soft silicone, has an angle studied in a particularly ergonomic way, with a reduced bite size for prolonged use without gum fatigue. The mouthpiece body consists of two pieces, with an inclination that ensures better and faster water drainage. A lower purge valve enables instant clearing when needed. The transparent tube has a side reinforcement in colored rubber.

Cressi Snorkel ITACA Features:

• Special patented new Aquastop valve: very efficient on up / down positions
• Dry guard: seals breathing tube when submerged
• Mouthpiece: drops away when not in use – great for scuba divers
• High-quality silicone mouthpiece: is comfortable and durable
• Angled anatomical mouthpiece: reduces jaw fatigue
• Lower purge valve: allows water to be quickly expelled
• Streamlined design reduces drag while swimming
• Adjustable clip for securing to any mask

BOOTIES CRESSI LOW 3MM

The Cressi Low Boots Dive Slipper is a 3mm short top boot made from super elastic nylon 2 neoprene for the best comfort with a sole built to provide extra comfort. These ultra-durable boots are built-to-last with a vulcanized rubber toe and heel cap with ribbed rubber sole. The slippers entry edge is rolled and sewn for strength and all seams are sewn for added strength and durability. 3mm Cressi Low Boots Dive Slippers are available in multiple sizes and are black in color.

Cressi 3mm Low Boots Dive Slipper Features:

• Cressi 3mm Low Boots Dive Slipper
• 3mm Short Boot
• Super Elastic Nylon 2 Neoprene
• Best-Comfort
• Sole Built-to-Provide Extra Comfort
• Durable Boots: Built-to-Last w/Vulcanized Rubber Toe and Heel Cap
• Ribbed Rubber Sole for Great Traction
• Slippers Entry-Edge is Rolled and Sewn for Strength
• Seams: Sewn for Added Durability
• Color: Black

Short Boots – 3 mm

– Super elastic neoprene for best comfort
– Sole built to provide extra comfort
– Ultra durable

Booties Low Cressi dapat digunakan untuk fin open heel. Boot ini malah nyaman karena untuk yang memiliki tulang kaki yang besar, booties tinggi dapat terlalu ketat dan tidak nyaman. Booties Low akan memberikan kenyamanan karena lebih elastis. Pada saat yang bersamaan, fin strap dapat duduk pada karet di belakang booties dengan sempurna. 

Wetsuit kadang membuat bagian batang kaki lebih sempit karena sudah memiliki 3mm booties + wetsuit 3mm. Di booties Cressi Low Boots..tidak ada lagi sempit di bagian tulang kaki karena terlalu tebal. Booties low-profile sehingga berhenti di angkle kaki. 

• Available in Multiple Sizes

No. 0 = 36 – 37 
No. 1 = 38 – 39 
No. 2 = 40 – 41 
No. 3 = 42 – 43 
No. 4= 43 – 44
No. 5 = 44 – 45 

FIN CRESSI THOR EBS

Brand new design for this extremely effective and yet very easy to use fin. The special arched profile of the fin, combined with the two central ribs promote a significant flow convection effect, known as spoon effect”, which stabilizes and boosts propulsion. Two lateral holes discharge the negative forces typically associated with this area and at the same time make for enhanced stability. The blades are molded from two different materials for improved reactivity.

These fins are perfect for scuba diving, whether you are an experienced diver or a novice. The Thor is made with the exclusive 3-material injection system patented by Cressi, which provides an excellent combination of strength, power, comfort, and aesthetics. This version of the Thor come with the standard foot strap with squeeze-style side release buckles. Under blade foot pocket design provides fast transmission of applied energy and great structural rigidity. Fins are available in multiple sizes and colors.

Cressi Thor Fins Features:

• Cressi Thor Fins:
• Extremely Effective and Easy to Use Fin
• Special Arched Profile Combined w/2-Central Ribs:
  Promote Significant Flow Convection Effect
  Effect Known as Spoon Effect”
  Stabilizes and Boosts Propulsion
• Two Lateral Holes Discharge Negative Forces & Enhances Stability
• Blade Molded from 2-Different Materials for Improved Reactivity
• Materials: Plastic and Rubber
• Perfect for Scuba Diving, Experienced Diver or Novice
• Exclusive 3-material Injection System Patented by Cressi
• Excellent Combination of Strength, Power, Comfort, and Aesthetics
• EBS Elastic Food Strap Sistem
• Under Blade Foot Pocket Design:Provides Fast Transmission of Applied Energy
  Great Structural Rigidity
• Available in Multiple Sizes and Colors

EBS SYSTEM, Cressi has developed this special strap to meet the needs of the most demanding divers, who need a comfortable fastening for their foot but one that is still practical and manageable.
Its special amply sized slot makes it very easy to put on, even when wearing thick gloves or three-fingered gloves for winter water.
The wrapping section is highly flexible, making adjustments unnecessary, and as a result it’s much easier to get all your equipment right in the first few meters of your descent and the fin stays in place against your foot despiten the increase in hydrostatic pressure.

It’s adaptable to all Cressi models, both with traditional hook  (Frog, Master Frog, Prolight) and rotating bayonet   (Thor, ARA, Reaction, Frog Plus).

Polypropylene blade: This material, inherited from apnea fins, has as its main characteristic the very fast transmission of applied energy and its great structural rigidity. It is applied to the shovel and inner area of ​​the sole sandwich. He is very nervous and reactive and facilitates a very agile and effective flutter. It has a stress-performance ratio clearly superior to traditional materials (natural rubber or thermoplastic, polyurethane, EVA). Likewise, it has a great resistance to breakage to the point that Cressi guarantees it for life for sporting use.

The inclination of the blade with respect to the foot pocket has increased by 5% compared to traditional diving models. This angulation provides greater efficiency and a more natural foot position during fluttering.

Polypropylene of the high module: Especially reactive, it is applied to the nervaturas of the blade and is responsible for providing rigidity and return to the blade. This material connects the critical point of transmission of energy (the instep) with the nerves in one piece, avoiding the usual loss of energy through excessively flexible components of the foot pocket that produce a heavy, slow and fatigue fluttering the instep .

The two lateral nozzles located in the zone where the flexion starts release the associated negative forces and allow the use of two ribs of high rigidity

Flexible elastomer: It is applied to the foot pocket and the areas that require flexibility and elasticity, since they influence the comfort of the diver: Footrest toe, interior of the sole and area of ​​the instep in contact with the ankle. It is also assigned to the areas that require non-slip capacity: Inserts in the sole (area in contact with the ground) and anti-shock, such as the lateral nerves of the blade. The fusion of both materials is done at the molecular level and its strength is guaranteed for life for sports use.

Central area of ​​the thermoplastic rubber blade of convex section assembled in the polypropylene blade.

Foot pocket reinforced in the upper area by a supplementary thickness and laterally by two extensions of polypropylene from the upper to avoid the dispersion of energy in the process of transmission from the foot to the blade.

Cressi Thor Fins Specifications:

Marterials:
Plastic and Rubber

Blade Type
Vented

Open Heel/Full Foot
Open Heel

Weight [with packaging]
X-Small/Small : 3.8lb
Small/Medium : 4lb
Large : 4.85lb

Available in the Following Sizes:
X-Small/Small , Small/Medium, Large

Available in the Following Colors:
White/Pink , Yellow/Silver, Blue.Silver