Paket Scuba Cressi Start Trini

BCD Cressi START

If you’re looking for a durable, strong and almost bulletproof BCD jacket than the Start is what you are looking for. Constructed from extremely Strong 500 and 1000-Denier Cordura, with excellent buoyancy, even on smaller sizes the Start full jacket BCD fits the bill. Designed with the demanding use of dive training and rental facilities in mind this BCD will give the sport diver years of dependable use.

The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. There are two plastic D-rings and two additional snap hooks for attachment of instruments and accessories. If used at dive facilities a size indicator is highly visible on the right shoulder.

BCD has two large accessory storage pockets with hook and loop closures, and the adjustable sternum straps along with both torso adjustment and waist straps are equipped with squeeze-style” side-release buckles for easy donning and doffing. The waist strap/cummerbund assembly is independently suspended from the air cell allowing the air cell to inflate away from the diver preventing the squeeze-effect” when inflated. The backpack is rigid for support and stability of the cylinder yet is fully padded for comfort. The Cressi Start BCD come with a 3/8″ threaded quick-disconnect low-pressure hose and owner’s manual.

Buoyancy in: lbs. / kg / size
29.2 lbs. / 13.3 kg / XS
31.5 lbs. / 14.3 kg / S
33.7 lbs. / 15.3 kg / M
38.1 lbs. /17.3 kg / L
44.9 lbs. / 20.4 kg /XL

Designed Primarily as Rental BC for Resorts and Dive Schools
Strong Enough to Rent Bullet-Proof Construction for Recreational Divers
Stability of a Jacket Style BC

Cressi Start BCD Features:

• Material: 1000 denier Cordura Colorlock

Cordura 1000 Denier on the outside panel and 500 Denier on the inside. Cordura is more resistant to erosion caused by long-term friction and extends the duration of the weldings, as it is harder than Nylon. This is especially important for dive centers where the jackets are often inflated to their maximum capacity

• Large, Easily-Seen Size Markings on Shoulder
• Size shown on right shoulder pad.
• Size indicator clearly visible on the shoulder strap

Size shown on the shoulder pad. It allows a better management of the stock of school equipment and rental in diving centers.

• 2″ (50 mm) Torso Adjustable Shoulder Straps
• D rings located at the shoulders and two more front side rings.
• Quick-Release adjustable Buckle

Axillary Straps: Comfortable unisex design, leaving the chest area completely free. Fastex 40mm axillary buckles

• 3/8″ Threaded Low-Pressure Hose
• Rear Kidney and Right Shoulder Over-Pressure Relief/Pull Dumps
• Inflator Integrated Cable Activated Pull Dump

Inflator with double air filtration system; under the hose connection stem and around the valve. Easily disassembled for small cleaning operations, even at the beach (sand infiltration, etc)

Reinforced anchoring flap for inflator hose

• The pressure gauge and octopus anchoring systems are integrated, which is especially useful for dive centers

Integrated pressure gauge compartment

Regulator Cressi MC9 XS COMPACT

The MC9 hyper-balanced diaphragm actuated 1st stage regulator has a lightweight body covered by a protective techno-polymer elastomer shell. The regulator is equipped with four low pressure and two high pressure ports. Internally the 1st stage is coated with an anti-friction anti-corrosion material that reduces resistance and allows the critical components to move freely. This makes the components perform and last longer between annual servicing and increases performance.

Research on internal air passages and incorporating a special assist chamber has lowered the drop of intermediate pressure upon inhalation and has kept this drop at a minimum, guaranteeing higher performance in any situation. Hyper-balancing allows for an increase of the intermediate pressure at maximum depths and when experiencing low pressure in the Scuba cylinder, offering higher performance at maximum depths and during the ascent phase of the dive.

The all chrome plated marine brass first stage regulator is a balanced diaphragm design which is environmentally sealed. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance.

The Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2’nd stage and a comfortable silicone mouthpiece. The Compact MC9 Regulator is lightweight weighing 30.97 oz. (878 g) with the hose. The Compact MC9 Regulator comes with an owner’s manual, is certified to EN250/2000 standards and is made in Italy Regulator is available in multiple color options.

Cressi Compact MC9 Regulator Features:

• Cressi Compact MC9 Regulator:
• Regulator Weight: 30.97 oz. (878 g) w/Hose
• Lightweight Jacketed 3/8″ Threaded Low Pressure (LP) Hose
• Packs Maximum Performance into Minimum Space
• Available in Multiple Color Options
• Certified to EN250/2014 Standards

1’st Stage: Cressi MC9 Hyper-Balanced Diaphragm

• Two 7/16″ Threaded High-Pressure Ports
• Four 3/8″ Threaded Low-Pressure Ports
• Body: Chrome Plated Marine Brass
• Shell: Techno-Polymer Shell Protect Body
• Lightweight and Compact First Stage
• Self-Lubricating Internal Coating
• Anti-Pressure Drop Pneumatics
• Inherently Environmentally Sealed
• Delicate Internal Parts Not Exposed-to-Contaminants

2’nd Stage: Cressi Compact

• Reliable Downstream Demand Valve
• Large Soft Purge Cover
• Comfortable Mouthpiece
• Reliable Downstream Demand Valve
• Large Soft Purge Cover: Easy to Clear
• Comfortable Silicone Mouthpiece
• Venturi Effect for Enhancing Performance
• Compact Shape: Reduces Weight and In-Water Drag
• Construction: Durable Non-Corrosive Lightweight Techno-Polymers
• Lightweight Design & Silicone Mouthpiece: Less Jaw Fatigue
• Streamlined Exhaust Tee: Directs Bubbles for Clear Field of View

Octopus Cressi XS Compact

The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers, and has a dependable downstream demand valve mechanism with a lever that has a low coefficient of friction. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2’nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2’nd stage and a comfortable silicone mouthpiece. The XS Compact Regulator weighs 4.76 oz. (135 g) without the hose, comes with a long 39″ (100 cm) 3/8″ hose, and owners manual. Octopus is in compliance with EN 250:2014 standard.

Cressi XS Compact Octopus Features:

• Cressi XS Compact Octopus
• Reliable Downstream Demand Valve
• Large Soft Purge Cover
• Venturi Dive/Pre-Dive Switch: Prevent Free-Flow when Not in Use
• Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
• Housing: Durable Non-Corrosive Hi-Tech Polymers
• Comfortable Mouthpiece
• Weight: w/o Hose 4.76 oz. (135 g)
• Hose Length: 39″ (100 cm)
• 3/8″ Thread Hose
• Owner’s Manual

Cressi XS Compact Octopus Specifications:

Adjustable 2’nd Stage
Yes, Venturi Pre-Dive/Dive Switch

2’nd Stage Type
Downstream Demand Valve

Materials
Housing; Polymers, Diaphragm and Mouthpiece; Silicone

Hose Thread
3/8″

Hose Length
39″ (100 cm)

Total Weight
4.76 oz. (135 g), w/o Hose

Octopus Cressi XS Compact

The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers, and has a dependable downstream demand valve mechanism with a lever that has a low coefficient of friction. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2’nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2’nd stage and a comfortable silicone mouthpiece. The XS Compact Regulator weighs 4.76 oz. (135 g) without the hose, comes with a long 39″ (100 cm) 3/8″ hose, and owners manual. Octopus is in compliance with EN 250:2014 standard.

Cressi XS Compact Octopus Features:

• Cressi XS Compact Octopus
• Reliable Downstream Demand Valve
• Large Soft Purge Cover
• Venturi Dive/Pre-Dive Switch: Prevent Free-Flow when Not in Use
• Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
• Housing: Durable Non-Corrosive Hi-Tech Polymers
• Comfortable Mouthpiece
• Weight: w/o Hose 4.76 oz. (135 g)
• Hose Length: 39″ (100 cm)
• 3/8″ Thread Hose
• Owner’s Manual

Cressi XS Compact Octopus Specifications:

Adjustable 2’nd Stage
Yes, Venturi Pre-Dive/Dive Switch

2’nd Stage Type
Downstream Demand Valve

Materials
Housing; Polymers, Diaphragm and Mouthpiece; Silicone

Hose Thread
3/8″

Hose Length
39″ (100 cm)

Total Weight
4.76 oz. (135 g), w/o Hose

Console AmScuD XP2

All AmScuD instruments give a very accurate, clear visibility readings and are made from the best quality materials. 

As such, we stand behind our products to give the utmost user experience.

Learning from our over 18 years in the industry, we have sucesfully established both design and materials that is a balanced of functionality, excellent robustness while maintaining a certain cosmetic estathic.

Did we tell you that our gauges are 100% Made in Italy? And it is backed by a full 1-year warranty.

The AmScuD submersible pressure gauge combined with depth gauge and compass, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder.

Dial range is stated in metric standard (BAR) from zero to 400 Bar while the depth gauge will show a METER unit with 1 meter increments.
Dial face is designed with ultra-clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. We also include color-indicator for a better idea of what states you are in.
This makes viewing as easy as possible, even in poor visibility conditions.

• Our gauge case is made from nickel plated brass
• The dial window is made of highly shock resistant material (anti-splinter polycarbonate). 400 BAR/5,800 PSI dial gauge for your mission critical applications.
• Elasto-Polimer housing to ensure reliability while maintaining its function and esthathics.
• Over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.
• Our exclusive Dual-Recoil® system located both in depth and pressure gauge. Unlike other gauges in the market, which gauge will fail in case of internal coil is failing, our gauges are designed to have a backup coil.
• NITROX compatible with Oxygen Cleaned environment, Viton O-Rings on all parts (swivel + HP port) and Christo-Lube lubricant.
• 30% longer phosphorecent effect.
• Color coded indicator with 10-bar increments (pressure) and 1-meter increments (depth)
• Improved swivel umberella design with chanelled o-ring gutter.
• 7/16″ HP port connection.
• We designed an angle for the gauge so it is easy to view while maintaining its shape for durability (in case of drop/shock).