Paket Scuba Cressi Solid Dasa

BCD Cressi SOLID

The Solid BCD is a fantastic Jacket style BCD that provides plenty of lift. This durable BCD has two zippered pockets and multiple D-rings for storage and attachment of accessory items with two 1″ (25 mm) technopolymer D-rings on the pockets. The BCD has three over-pressure relief/dump valves with two located on the left and right shoulders and a third lower valve on the rear right of the air cell. All three can be manually dumped two with pull cords and the other with the power inflator mechanism. If used at dive facilities a size indicator is highly visible on the right shoulder.

BCD adjustable sternum strap along with both 2″ (50 mm) torso adjustment straps and waist strap are all equipped with squeeze-style side-release buckles for easy donning and doffing. The light-weight back support is rigid for proper cylinder stability but is fully padded for comfort and the ridged backpack is equipped with a grab handle for easy transport and gear donning assist. BCD is built to last made from 500D Cordura (exterior part) and 420D nylon (interior). The Cressi Solid BCD come with a 3/8″ threaded quick-disconnect low-pressure hose and owner’s manual.

Cressi Solid BCD Features:

• Light-Weight Rigid Back Support for Proper Cylinder Stability
• Fully Padded Back Plate for Comfort
• Construction: 500D Cordura (exterior part) and 420D Nylon (interior)
• Ridged Backpack Equipped w/Grab Handle for Easy Transport and Gear Donning Assist

Lean backpack with reduced thickness to the maximum to lighten it. Very resistant and semi-flexible material. Shock absorber in thermoplastic rubber for better fixing of the tank. It is possible to use double tank strap. Includes safety strap for fastening the bcd to the tank valve.
Reinforcement in the neck to avoid possible tears due to falls of tanks when the bcd and regulator are mounted.
Cordura 500 Denier. Cordura provides greater resistance to erosion due to long-term friction and prolong the duration of the thermo welding as it is harder than Nylon. This feature is especially important in diving centers where the inflating of the bcd is repetitive and frequent up to the limit of its capacity.

• Large, Easily-Seen Size Markings on Shoulder
• Size shown on right shoulder pad.

Size shown on the shoulder pad. It allows a better management of the stock of school equipment and rental in diving centers.

• Elastic chest strap with integrated whistle.
• 2″ (50 mm) Torso Adjustable Shoulder Straps
• D rings located at the shoulders and two more front side rings.

• Buoyancy Control:
  3-Exhaust/Overpressure Relief Valves
  2-Vlaves with Pull Dump Handle (Right Shoulder/Lower Rear)
  Cressi’s Power Inflator with Cable Activated Pull Dump
  3/8″ Threaded Low Pressure Quick-Disconnect Hose

Inflator with double air filtering system under the connecting stem of the hose and around the valve. Easily disassembled for small cleaning operations, even at the beach (sand infiltrations, etc). Rubber hose with clamp to fix the inflator hose.

• Dual Zippered Pockets
• Two 1″ (25 mm) Technopolymer D-Rings On Pockets for Accessory Attachment

Integrated compartments for fixing the pressure gauge and the Octopus, very useful especially for diving centers.

• Adjustable Sternum Strap
• Adjustable Waist Strap with Cummerbund Pad for Comfort
• All Straps Equipped w/Squeeze-Style Side-Release Buckles
• Quick-and-Easy Donning and Doffing

SIZE CHART BCD :

	XXS	XS	S	M	L	XL
Chest (in)	28-33″	32-35″	35-39″	39-43″	41-45″	45-49″
Waist (in)	28-32″	30-35″	32-37″	37-41″	39-43″	43-47″
Weight (lbs)	106-132	121-143	139-172	165-187	176-220	243-265

 

Cressi Solid BCD Specifications:

Body
Jacket

Buoyancy Bag
Not Specified by Manufacturer

Valves
3-Dump/Overpressure Relief Valves

Pockets
2-Zippered

Shoulder Straps
Adjustable Torso Straps w/Squeeze-Style Side Release Buckles

Stainless Steel Rings
No, Plastic

Waist Strap
Adjustable Waist Strap w/Squeeze-Style Side Release Buckle and Cummerbund Pad

Chest Buckle
Yes, Adjustable Sternum w/Squeeze-Style Side Release Buckle

Oral Inflator
Cressi Power Inflator w/Cable-Activated Pull Dump

BCD Materials
500D Cordura (exterior part) and 420D Nylon (interior)

Regulator Cressi AC2 XS2 Regulator

AC2/XS2  is the most inexpensive regulator in the Cressi range.
The Cressi AC2 piston 1st stage comes with the traditional XS2 2nd stage
Constantly reviewed over the years, this regulator has lots of admirers in the world due to the fact that it is extremely simple and strong, features that make it easy to use and result in low-cost maintenance.

1st STAGE AC2:
Simple piston 1st stage, a “work mule” that is affordable, simple, reliable and robust, suitable for intense use. This first stage is
appreciated by dive centers and professional companies who consider it to be a very rentable tool, due to its low cost and practically nonexistent need for maintenance, as well as a surprising level of performance.
Conical filter.
One 7/16” high pressure port (HP) and four 3/8” low pressure ports (LP).
Complete maintenance kit which includes very affordable spare parts. Weight: Int: 615 g / DIN 480 g

TECHNICAL FEATURES 1ST STAGE
– Piston design
– 1 7/16” HP ports UNF
– 4 3/8” LP ports UNF
– Operating pressure:
INT version: 230 bar | 3,336 psi
– Calibration pressure:
9.8÷10 bar | 142÷146 psi
– Brass body Electroless Nickel plated
– High capacity conical fi lter
electroless nickel plated
– Long lasting piston: AISI 316 stainless steel
– Extremely easy in maintenance since IP
is adjustable from the outside
– Stainless steel spring
– Flow rate: 74.16 cu ft/min (2,100 l/min)
– Yoke version weight: 22.4 oz / 635 g
2ND STAGE:
The body of the 2nd stage is traditionally sized, made from hi-tech polymers and with a lateral valve downstream system with adjustable orifice, simple and extremely reliable.
The 2nd stage comes with a a flow deviator that acts on the Venturi effect, with dive/pre-dive function.
In any case, performance levels are high, and it is suitable for any kind of dive. XS2 comes with the traditional Cressi AC2 piston model.
This is a non-balanced first stage with such high performance that it can be compared to lots of excellent balanced models.
The small number of components, the low weight and the excellent materials make it the strongest Cressi first stages, and the most steadfast to maltreatment, a real “working horse” amongst regulators.

TECHNICAL FEATURES 2ND STAGE
– Downstream system
– Adjustable venturi effect
– Easy maintenance
– Weight without hose: 206 gr
JACKETED HOSE extremely light and flexible weight: 153 gr
CERTIFICATION EN250/2000

Octopus Cressi XS Compact

The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers, and has a dependable downstream demand valve mechanism with a lever that has a low coefficient of friction. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2’nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2’nd stage and a comfortable silicone mouthpiece. The XS Compact Regulator weighs 4.76 oz. (135 g) without the hose, comes with a long 39″ (100 cm) 3/8″ hose, and owners manual. Octopus is in compliance with EN 250:2014 standard.

Cressi XS Compact Octopus Features:

• Cressi XS Compact Octopus
• Reliable Downstream Demand Valve
• Large Soft Purge Cover
• Venturi Dive/Pre-Dive Switch: Prevent Free-Flow when Not in Use
• Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
• Housing: Durable Non-Corrosive Hi-Tech Polymers
• Comfortable Mouthpiece
• Weight: w/o Hose 4.76 oz. (135 g)
• Hose Length: 39″ (100 cm)
• 3/8″ Thread Hose
• Owner’s Manual

Cressi XS Compact Octopus Specifications:

Adjustable 2’nd Stage
Yes, Venturi Pre-Dive/Dive Switch

2’nd Stage Type
Downstream Demand Valve

Materials
Housing; Polymers, Diaphragm and Mouthpiece; Silicone

Hose Thread
3/8″

Hose Length
39″ (100 cm)

Total Weight
4.76 oz. (135 g), w/o Hose

Octopus Cressi XS Compact

The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers, and has a dependable downstream demand valve mechanism with a lever that has a low coefficient of friction. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2’nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2’nd stage and a comfortable silicone mouthpiece. The XS Compact Regulator weighs 4.76 oz. (135 g) without the hose, comes with a long 39″ (100 cm) 3/8″ hose, and owners manual. Octopus is in compliance with EN 250:2014 standard.

Cressi XS Compact Octopus Features:

• Cressi XS Compact Octopus
• Reliable Downstream Demand Valve
• Large Soft Purge Cover
• Venturi Dive/Pre-Dive Switch: Prevent Free-Flow when Not in Use
• Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
• Housing: Durable Non-Corrosive Hi-Tech Polymers
• Comfortable Mouthpiece
• Weight: w/o Hose 4.76 oz. (135 g)
• Hose Length: 39″ (100 cm)
• 3/8″ Thread Hose
• Owner’s Manual

Cressi XS Compact Octopus Specifications:

Adjustable 2’nd Stage
Yes, Venturi Pre-Dive/Dive Switch

2’nd Stage Type
Downstream Demand Valve

Materials
Housing; Polymers, Diaphragm and Mouthpiece; Silicone

Hose Thread
3/8″

Hose Length
39″ (100 cm)

Total Weight
4.76 oz. (135 g), w/o Hose

Console AmScuD XP2

All AmScuD instruments give a very accurate, clear visibility readings and are made from the best quality materials. 

As such, we stand behind our products to give the utmost user experience.

Learning from our over 18 years in the industry, we have sucesfully established both design and materials that is a balanced of functionality, excellent robustness while maintaining a certain cosmetic estathic.

Did we tell you that our gauges are 100% Made in Italy? And it is backed by a full 1-year warranty.

The AmScuD submersible pressure gauge combined with depth gauge and compass, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder.

Dial range is stated in metric standard (BAR) from zero to 400 Bar while the depth gauge will show a METER unit with 1 meter increments.
Dial face is designed with ultra-clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. We also include color-indicator for a better idea of what states you are in.
This makes viewing as easy as possible, even in poor visibility conditions.

• Our gauge case is made from nickel plated brass
• The dial window is made of highly shock resistant material (anti-splinter polycarbonate). 400 BAR/5,800 PSI dial gauge for your mission critical applications.
• Elasto-Polimer housing to ensure reliability while maintaining its function and esthathics.
• Over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.
• Our exclusive Dual-Recoil® system located both in depth and pressure gauge. Unlike other gauges in the market, which gauge will fail in case of internal coil is failing, our gauges are designed to have a backup coil.
• NITROX compatible with Oxygen Cleaned environment, Viton O-Rings on all parts (swivel + HP port) and Christo-Lube lubricant.
• 30% longer phosphorecent effect.
• Color coded indicator with 10-bar increments (pressure) and 1-meter increments (depth)
• Improved swivel umberella design with chanelled o-ring gutter.
• 7/16″ HP port connection.
• We designed an angle for the gauge so it is easy to view while maintaining its shape for durability (in case of drop/shock).