Long Fin Cressi Gara Modular Nery

The foot pocket’s volume has been revised after aggressive anatomic studies, in such a way as the volume is proportional to the widening effect that the foot causes depending on the foot size. It doesn’t follow a fixed proportion size by size because proportionally a small foot fattens” more than a big foot when putting the foot in the foot pocket. The foot pocket combines two materials, a thermoplastic rubber with high hardness (shore 90), flexible but not elastic and is resistant, to the whole foot pocket’s sole and the exclusive strap over the instep aimed to make the effort transmission to be immediate without dissipation in rubbery compositions. The middle of the instep incorporates a band of 2 cm of amplitude self-adjusting”, that allows a slight expansion (between 2 and 4 mm according to size) to adapt to people with high instep or if you want to use thick neoprene socks. The expansion has been meticulously adjusted not to be detrimental to the energy transmission. The hardness level of the blade is LD: soft for divers of reduced size and/or that do long movements and medium depth diving. Fin has an interchangeable blade and is available in multiple sizes.

Cressi Gara Modular LD Fins-Nery Line Features:

• Cressi Gara Modular LD Fins-Néry Line:
• New Version of Gara Modular Fin
• Made in Collaboration with Freediving Champion Guillaume Néry
• High-Modulus Propylene Blade (2500 Mpa)
• Anti-Skid Spoilers on Blade End
• Decreasing Thickness of Blade from 4mm to 2mm
• Variable Thickness: Provides Highly Progressive Design, Eliminates Skid Tendency
• First Half of Blade Set Rigid, Final Half More Flexible
• Foot Pocket’s Volume Revised After Aggressive Anatomic Studies
• Volume Proportional to Widening Effect Caused by Foot
• Composite Foot Pocket: Dual Material, Hard Shore (90) & Rubber
• Band of 2 cm of Amplitude Self-Adjusting” Design Expansion (2 and 4 mm according to size)
• Adapts to People w/High Instep or Use w/Thick Neoprene Socks
• Expansion Meticulously Adjusted. Not Detrimental to Energy Transmission
• LD Blade Hardness:
  Soft for Divers of Reduced Size
  Divers w/Long Movements & Medium Depth Diving
• Interchangeable Blade
• Available in Multiple Sizes

The foot pocket is available separately with the different assembly elements. Flexible shore 60º material is extended alternatively on the heel area to play the non-slip key role when we walk on a boat or on rocks.The need of having a removable version to install blades of several materials or carbon ends in the new Gara Modular, which enjoys Cressi experience in compositions of different materials and features.

The instep incorporates on the middle a self adjusting 2cms wide strap, which allows a slight expansion (from 2 to 4mm depending on the size) to fit in people who have high instep or also in case of using thick foot pockets. The expansion has been thoroughly balanced to avoid damaging the energy transmission. The other foot pocket’s part (grey area) has a flexible composition shore 60º to obtain the maximum comfort.

The instep incorporates on the middle a self adjusting 2cms wide strap, which allows a slight expansion (from 2 to 4mm depending on the size) to fit in people who have high instep or also in case of using thick foot pockets. The expansion has been thoroughly balanced to avoid damaging the energy transmission.

The original blade is made of high-modulus propylene (2500 Mpa). It has lifelong warranty and highly elastic return.

Cressi Gara Modular LD Fins-Nery Line Specifications:

Materials
Blade; Propylene Blade (2500 Mpa), Foot Pocket; Hard Shore Plastic (90) & Rubber

Blade Type
Non-Vented

Open Heel/Full Foot
Full Foot

Interchangeable Blade
Yes

Weight [with packaging]
7/8 = 38/39: 4.3 lb,
8.5/9.5 =  40/41: 4.35 lb,
10/10.5 = 42/43: 4.55 lb,
11/11.5 = 44/45, 12/13 46/47: 5.45 lb

Available in the Following Sizes:
7/8 = 38/39, 8.5/9.5 = 40/41, 10/10.5 = 42/43, 11/11.5 = 44/45, 12/13 = 46/47