BCD Cressi Patrol
The Patrol BC is an impressively light weight, rear inflation BC that is anatomically designed for maximum comfort and durability. The special air cell compression strap guarantees extra quick deflation and volume control. The ultralight rigid back plate with its integrated carrying handle ensures optimal stability. The Patrol also features Cressi’s Flat-Lock-Aid integrated weight system that makes it easy to release the pockets. There are 3 over pressure relief valves/dump valves: one on the upper part of the inflator hose, one valve on the right-hand side of the shoulder and a third on the lower right-hand side of the air cell. The inflator dump/valve is cable activated by pulling on the power inflator mechanism and the shoulder and lower valves have a pull cord.
Features include Flat-Lock-Aid Integrated Weight Pockets with 20 lbs. (9 kg) weight releasable capacity, optional tank band Trim Weight Pockets (see SKU: CSBTWP) a light ridged back plate with soft padded back, and 1-roll-up cargo pocket. The Patrol also features plastic D-rings to help reduce weight and the shoulder and waist harness are fully adjustable to one full size up or down from the stated size. Rear inflation design with a durable 420-Denier nylon air cell with bungee cords to provide a low profile and rapid deflation of air cell. The BCD harness system uses traditional squeeze-style” side-release buckles and adjustable straps on the shoulders, chest and waist for precise adjustment and fit. BCD comes equipped with Cressi’s streamline Commando Power Inflator with 3/8″ threaded quick-disconnect hose. The inflator mechanism is environmentally sealed for greater reliability and less maintenance. The Cressi Ace BCD provides a lift capacity from 29.2 lbs. to 50.6 lbs. (13.3 kg to 22.9 kg), weighs from 6.7 lbs. to 7.5 lbs. (3 kg to 3.4 kg) depending on size and comes with an owner’s manual.
Cressi Patrol BCD Features:
- Anatomically Designed for Maximum Comfort and Durability
- Harness System: Traditional “Squeeze-Style” Side-Release Buckles
The harness, with pattern of the axillary shoulder pads, is completely independent of the inflatable area (100% dorsal), this combination provides great comfort and freedom of movement.
- Adjustable Straps on Shoulders, Chest and Waist for Precise-Adjustment-and-Fit
Axillary straps with 40mm buckles.
- 3/8″ Threaded Quick-Disconnect Hose
- Cressi’s Streamline Commando Power Inflator with Cable Activated Pull Dump Valve
- Bungee Cords: Provide Low-Profile and Rapid Deflation of Air Cell
- 3-Exhaust Valves for Easier Buoyancy Adjustments
New low profile upper vacuum valve with non-return valve that prevents the accidental entrance of water
New anchoring flap for the inflator hose in thermoplastic rubber with embossed logo.
Direct System Inflator: Double metal filter in the air entrance under the stem and cylindrical shape around the valve. Very strong body and attractive design. Inflation rate recalibrated, 50% higher (traditional bcd of size M in 4 seconds at 1 atm). Anti-sand design with minimized mouth inflator nozzle. Push button with wide clearances with respect to its seat to avoid the blocking action of the sand grains. Vacuum button with sealing using a silicone washer. Push button integrated in profile to avoid unwanted inflation when pulling the hose to empty. New very resistant hose of very progressive curvature. Guide clamp-integrated hose.
Three vacuum overpressure valves.
- High Lift Capacity Rear Inflation: Means Extra Freedom of Movement/Buoyancy
- Anatomically Designed for Maximum Comfort and Durability
- Rear Inflation Design with Durable 420-Denier Nylon Air Cell
- Impressively Light Weight, High Lift Capacity, Rear Inflation BC
Retaining elastics of the dorsal air chamber. This jacket combines a lightweight and flexible fabric with a high lifting capacity. The elastics keep the bladder collected and avoid air displacement during the dive that would cause instability.
- Soft Padded Back
- Flat-Lock-Aid Integrated Weight Pockets
- 20 lbs. (9 kg) Weight Releasable Capacity
- Optional Tank Band Trim Weight Pockets (see SKU: CSBTWP)
Integrated weight system L.A.S.: horizontal insertion/releasing system of the weight pockets located in the front part of the jacket. Following the Cressi idea that the management of the ballast should be able to do it in an automatic and intuitive way, even wearing the bcd and in bad conditions (in flotation, with rough seas, etc.), the ease of insertion of the pockets it’s been studied significantly. These fit perfectly in their seats and also a “D” ring located in the mouth of the access facilitates fabric tension and the direct entry of the bag.
- 1-Roll-Up Cargo Pocket
- Multiple Plastic D-Rings for Accessory Attachment
Roll-up pocket and have a many D-Rings.
- Lift Capacities:
X-SMALL & SMALL : 29.2 lbs. (13.3 kg)
MEDIUM : 42.7 lbs. (19.4 kg)
LARGE & X-LARGE : 50.6 lbs. (22.9 kg) - Weight:
X-SMALL & SMALL : 5.7 lbs. (2.6 kg)
MEDIUM : 6 lbs. (2.75 kg)
LARGE & X-LARGE : 6.4 lbs. (2.9 kg)
SIZE CHART BCD :
XXS | XS | S | M | L | XL | |
---|---|---|---|---|---|---|
Chest (in) | 28-33″ | 32-35″ | 35-39″ | 39-43″ | 41-45″ | 45-49″ |
Waist (in) | 28-32″ | 30-35″ | 32-37″ | 37-41″ | 39-43″ | 43-47″ |
Weight (lbs) | 106-132 | 121-143 | 139-172 | 165-187 | 176-220 | 243-265 |
Cressi Patrol BCD Specifications:
BC Body
Back Inflator
Bouyancy Bag
XS & SM; 29.2 lbs. (13.3 kg), MD; 42.7 lbs. (19.4 kg), LG & XL; 50.6 lbs. (22.9 kg)
Valves
3-Overpressure Relief/Dump Valves
Pockets
1-Roll Down Cargo
Shoulder Straps
Torso Adjustable w/”Squeeze-Style Side-Release Buckles
Stainless Steel Rings
No, Multiple Plastic
Waist Strap
Yes, Adjustable w/”Squeeze-Style Side-Release Buckle
Chest Buckle
Yes, Adjustable w/”Squeeze-Style Side-Release Buckle
Oral Inflator
Cressi Commando Power Inflator
Materials
Internally Urethane Laminated 420-Denier Nylon
Weight Integrated
Yes
Weight Capacity
Releasable: 20 lbs. (9 kg), Non-Releasable (Optional): 10 lbs. (4.5 kg), see SKU: CSBTWP
Weight
XS& S : 5.7 lbs. (2.6 kg), M : 6 lbs. (2.75 kg), L & XL : 6.4 lbs. (2.9 kg)
Regulator Cressi AC2 XS COMPACT
The XS Compact AC2 Regulator is an exceptionally dependable non-balanced flow-by-piston designed 1’st stage regulator that is a great choice as a new divers rig, or for use as a stage bottle regulator system. This simple yet fail-safe design will deliver air even if there is a first stage failure. The 1’st stage has 1 high pressure (HP) 7/16″ threaded port and 4 low pressure (LP) 3/8″ threaded ports and is made from marine grade chromed brass for long life and durability. A conical filter is used which has greater surface area for higher air flow characteristics through the 1’st stage regulator.
The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers and has a dependable downstream demand valve mechanism. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2’nd stage comes with a flow deviator that acts on the venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2’nd stage and a comfortable silicone mouthpiece for breathing comfort. The XS Compact AC2 Regulator weighs 35 oz. (994 g) with hose and comes with an owner’s manual.
TECHNICAL FEATURES 1ST STAGE
- Piston design
- 1 7/16” HP ports UNF
- 4 3/8” LP ports UNF
- Operating pressure:
INT version: 230 bar | 3,336 psi - Calibration pressure:
9.8÷10 bar | 142÷146 psi - Brass body Electroless Nickel plated
- High capacity conical fi lter
electroless nickel plated - Long lasting piston: AISI 316 stainless steel
- Extremely easy in maintenance since IP
is adjustable from the outside - Stainless steel spring
- Flow rate: 74.16 cu ft/min (2,100 l/min)
- Yoke version weight: 22.4 oz / 635 g
TECHNICAL FEATURES 2ND STAGE
- Downstream system
- Adjustable Venturi effect
- Easy maintenance
- Weight without hose:
7.27 oz – 206 g - Adjustable intermediate
pressure from the out side of the
regulator due to our patented
ACs design
JACKETED HOSE
extremely light and flexible
weight: 5.4 oz – 153 g
CERTIFICATION
EN 250 2014 A>10°C
Cressi XS Compact AC2 Regulator Features:
- Cressi XS Compact AC2 Regulator:
- Economical Low Maintenance Regulator Design
- Great Choice for New Divers Rig, or Use for Stage Bottle System
- Regulator Weight: 35 oz. (994 g) with Hose
- Lightweight Jacketed 3/8″ Threaded Low Pressure (LP) Hose
- 2’nd Stage Features:
- Hi-Tech Polymer Housing
- Durable Non-Corrosive Design
- Reliable Downstream Demand Valve System
- Large Soft Purge Cover
- Venturi Dive/Pre-Dive Switch: Prevent Free-Flow when Not in Use
- 1’st Stage Features:
- Non-Balanced Flow-By Piston
- Fail-Safe Design
- Marine Grade Chromed Brass Construction
- 4 LP Ports, 3/8″ Thread
- 1 HP Port, 7/16″ Thread
Cressi XS Compact AC2 2’nd Stage Regulator Features:
This regulator is made up of the new 2nd stage XS Compact, combined with the MC9 diaphragm first stage.
Its strengths lie in its extreme lightness,excellent performance, very easy maintenance and affordable purchase price.
- Self-lubricating jacketed cylinder
- Removable stainless steel nozzle Anti-pressure drop pneumatic spring
- Sintered cup fi lter
- 4 low pressure outlets
- 1 high pressure outlets
2nd stage XS COMPACT: body in techno-polymer, with dive-pre dive adjustment.
Specifications:
This diaphragm hyper-balanced 1st stage
Self-lubricating jacketed cylinder (as.com)
Removable stainless steel nozzle
- Anti-pressure drop pneumatic spring
- Sintered cup fi lter
- 4 low pressure outlets
- 1 high pressure outlets
2nd stage XS COMPACT: body in techno-polymer, with dive-pre dive adjustment.
Cressi XS Compact AC2 Regulator Specifications:
1’st Stage Type
Non-Balanced Flow-By Piston
LP Ports
4 LP Ports, 3/8″ Thread
HP Ports
1 HP Port, 7/16″ Thread
Adjustable 2’nd Stage
Yes, Dive/Pre-Dive Venturi Adjustment
2’nd Stage Type
Downstream Demand Valve
Materials
First Stage: Chromed Brass, Second Stage: Polymer Plastic, Silicone Rubber
Hose Thread
3/8″
Total Weight
35 oz. (994 g) with Hose
Octopus Cressi XS Compact
The XS Compact Second-Stage housing is made of durable non-corrosive hi-tech polymers, and has a dependable downstream demand valve mechanism with a lever that has a low coefficient of friction. The flow of air is channeled to the mouthpiece by injection, creating a venturi effect enhancing the performance. The 2’nd stage comes with a flow deviator that acts on the Venturi effect, with dive/pre-dive adjustment function. Large soft purge cover allows easy clearing of 2’nd stage and a comfortable silicone mouthpiece. The XS Compact Regulator weighs 4.76 oz. (135 g) without the hose, comes with a long 39″ (100 cm) 3/8″ hose, and owners manual. Octopus is in compliance with EN 250:2014 standard.
Cressi XS Compact Octopus Features:
- Cressi XS Compact Octopus
- Reliable Downstream Demand Valve
- Large Soft Purge Cover
- Venturi Dive/Pre-Dive Switch: Prevent Free-Flow when Not in Use
- Yellow Front Cover for Easy Identification in an Out-of-Air-Emergency
- Housing: Durable Non-Corrosive Hi-Tech Polymers
- Comfortable Mouthpiece
- Weight: w/o Hose 4.76 oz. (135 g)
- Hose Length: 39″ (100 cm)
- 3/8″ Thread Hose
- Owner’s Manual
Cressi XS Compact Octopus Specifications:
Adjustable 2’nd Stage
Yes, Venturi Pre-Dive/Dive Switch
2’nd Stage Type
Downstream Demand Valve
Materials
Housing; Polymers, Diaphragm and Mouthpiece; Silicone
Hose Thread
3/8″
Hose Length
39″ (100 cm)
Total Weight
4.76 oz. (135 g), w/o Hose
Console AmScuD XP2
All AmScuD instruments give a very accurate, clear visibility readings and are made from the best quality materials.
As such, we stand behind our products to give the utmost user experience.
Learning from our over 18 years in the industry, we have sucesfully established both design and materials that is a balanced of functionality, excellent robustness while maintaining a certain cosmetic estathic.
Did we tell you that our gauges are 100% Made in Italy? And it is backed by a full 1-year warranty.
The AmScuD submersible pressure gauge combined with depth gauge and compass, with an internal Bourdon pressure measuring mechanism, gives you clear information on the gas contents of your cylinder.
Dial range is stated in metric standard (BAR) from zero to 400 Bar while the depth gauge will show a METER unit with 1 meter increments.
Dial face is designed with ultra-clarity in mind by being uncluttered, with large black figures on a luminous background giving a long phosphorescent effect. We also include color-indicator for a better idea of what states you are in.
This makes viewing as easy as possible, even in poor visibility conditions.
- Our gauge case is made from nickel plated brass
- The dial window is made of highly shock resistant material (anti-splinter polycarbonate). 400 BAR/5,800 PSI dial gauge for your mission critical applications.
- Elasto-Polimer housing to ensure reliability while maintaining its function and esthathics.
- Over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.
- Our exclusive Dual-Recoil® system located both in depth and pressure gauge. Unlike other gauges in the market, which gauge will fail in case of internal coil is failing, our gauges are designed to have a backup coil.
- NITROX compatible with Oxygen Cleaned environment, Viton O-Rings on all parts (swivel + HP port) and Christo-Lube lubricant.
- 30% longer phosphorecent effect.
- Color coded indicator with 10-bar increments (pressure) and 1-meter increments (depth)
- Improved swivel umberella design with chanelled o-ring gutter.
- 7/16″ HP port connection.
- We designed an angle for the gauge so it is easy to view while maintaining its shape for durability (in case of drop/shock).